Categories: Fishing

17 Top Rated Ice Fishing – Ice Augers

Top 17

Nils USA Convertible Hand Auger Clam Outdoors™ Drill Auger Conversion Kit StrikeMaster® Lazer™ Hand Auger Jiffy E-6 Lightning Electric Ice Auger StrikeMaster® Lazer Replacement Blades StrikeMaster® Cordless-Drill Adapter for Power Augers StrikeMaster® Single Chipper Ice Drill Assembly Nero Hand-Auger Blades StrikeMaster® Low-Smoke Two-Cycle Oil Jiffy Pro4 X-Treme Ice Drill Nero Hand Augers StrikeMaster® Lazer Drill Assembly Cabela’s Auger Hauler – Large StrikeMaster® Lazer Blade Guard StrikeMaster® Auger Storage Bracket Jiffy Model 30 Gas-Powered Ice Auger Cabela’s® Hand Ice Auger Replacement Blades
Rating ★★★★★
Brand Cabela’s Nils Master StrikeMaster Strike Master Strike Master FELDMANN ENG. STRIKE MASTER Jiffy Strike Master Cabela’s StrikeMaster JIFFY StrikeMaster Clam IceArmor Strike Master

Nils USA Convertible Hand Auger

Take the hard work out of an exciting day of ice fishing with simple transport and use. Pack the auger and your cordless drill to your favorite frozen lake and you’ll have lines in the water in no time. Slick cutting head is suitable for any ice condition. Attached flare prevents accidental loss down the hole. Low-speed or high-torque drill settings recommended to avoid damage to the drill. Also includes a manual auger handle. Premium Nils Master blades make drilling easy. Drill not included.
Diameters: 4.5″, 6″, 8”.

Hey guys I just want to make a video. This new auger yesterday. This thing is awesome. Ijust wanted to show. You guys this is just a cheap porter-cable drill 18 volts there’s. Nothing special we drilled 10 holes with maybe 12 today. And it’s been sitting for a couple hours. And he’s probably ten degrees. Though so that’s pretty quick right there the battery’s been sitting I got about five inches.

Apply now

Clam Outdoors™ Drill Auger Conversion Kit

  • Allows you to use your 18-volt drill to power your ice auger
  • No need to remove the chuck; simply attach to auger bit section
  • Anodized-aluminum frame/plate, rubber-dipped handles and trigger
  • Built-in ball bearing to absorb the torque
  • Accommodates most 18-volt lithium-battery-powered drills
  • Why work so hard to drill your ice-fishing holes? The Clam Outdoors Drill Auger Conversion Kit turns your manual auger into a power auger, or in a pinch, can cover for your power auger when it’s out of service. All you need is to attach any high-torque, 18-volt lithium-battery-powered drill to your auger bit section – no need to remove the chuck. The Clam conversion kit provides an anodized-aluminum frame/plate with rubber-dipped handles and trigger, giving you a solid platform for drilling. A built-in ball bearing absorbs the torque from cutting into the ice, so the only thing your drill has to do is spin the blades. Tall bracket accommodates most drill types. Includes all mounting hardware.
    Wt: 5 lbs.

    Cancer and Reproductive Harm- www.P65Warnings.ca.gov.

    Hi Dave Jennifer clamp protocol we’re here at Pro day in Minneapolis at their headquarters. We got over 275 pro staffers from across the ice Belt gonna be here checking out the new products. One of my favorite new products here is the conversion kit. What this allows me to do is take my drill. Idrill holes in my sheetrock head home. And hook it up to a nice drill. And drill holes through the ice. You know some of the new features. This year is we have a hexagon shaft. That cuts right into. This Chuck, so we don’t have to remove the Chuck to make. It usable in the wintertime. We also added some adjustments here so. It handles more different kinds of drills. Any of the drills you get will fit on here it’s important. It has a big battery. You know this is a 4 amp battery here you’ll really need to make sure. You get a good sized battery to make. This work but you simply got. These nice handles squeeze the trigger. This thing works I’d never cut a hole through the ice slab to attending but my electric auger.

    You know try to make sure. It seemed easier so you’ll have.

    Apply now

    StrikeMaster® Lazer™ Hand Auger

  • Chrome-alloy stainless steel Lazer blades
  • Cuts through ice nearly twice as fast as conventional models
  • Two-piece handle adjusts from 48″ to 57″
  • Powder-coating reduces ice build-up
  • Ergonomic design paired with chrome-alloy stainless steel Lazer blades allow you to cut through ice nearly twice as fast as conventional models. The two-piece handle adjusts from 48″ to 57″, letting you bore through thick ice. Powder-coating reduces ice buildup and soft rubber grips reduce hand fatigue.
    Available: 4″, 5″, 6″, 7″, 8″.
    Cancer and Reproductive Harm- www.P65Warnings.ca.gov.


    Orderlies are a hand auger from Amazon use. It we’re gonna see all well. It works some of our economy ice fishermen. That don’t want to buy a gas-powered auger it’s kind of nice a real light tool beats lugging around a 40 pound propane. One yeah they’re under $100 yeah that’s right. Some on Amazon we paid eighty-seven dollars for this is a six-inch auger. We got the six inch. It comes in four five six seven eight inch augers sizes the six inch. You can get a big northern through. We can get about a 10-pound truck through no problem so. We do a lot of trout fishing here in Sheboygan cinch is playing so. And then it’s easier to drill through to the bigger auger. You get a little more resistance. You get, so we’re gonna try the six-inch looks like. We got an adjustable crank handle here for a different height. If you’re taller or shorter got. Some pin holes in there for your set point here. We go here’s oh even came with a nice little protectant oh yes boy. Idon’t know I don’t look like a stench yep that’s a six-inch small. That was that a the original. We were using our first year. Imight have been an eighth then I’ll have to measure yeah that’s gonna be that’ll still work those fish. They compress right dong there. We got a nice little wing. That on here real quick fast assembly with. These things here we’ll pull. This bad boy out oh is. This metal could then 20 Bowls for the last four nights here in Wisconsin so. This metal is gold we’re gonna put. It on the highest setting yep then. Ihave to those other settings must be for youth maybe go look at.

    This easily assembly. That is nice stick it rights in there. One two three and you’re drilling pull. This out right on the ice into. One for like 87 dollars 87 not bad under $100 it’s better. And spending for four to six hundred dollars yeah you’re just getting started. And ice fishing good gotta get. That baby lined up perfectly. Iguess gotta see through. That hole with my bad eyes oh she’s taking yeah real quick set up. Iwould say preferably. You want that wingnut straight up. And down so it doesn’t catch on. Anything it comes with a nice guard that’s nice. You need to have to protect your off place. These blades on here let’s look at these blades. All right these are. What they call the laser blades they’re pretty sharp boy. It looks like they are interchangeable replaceable yes. They are you need to get on a set screw that’s why they call. This happy you had a laser so. Ithink those would be replaceable yes potentially. All right what does the quality kind of look like here overall I’ll give her a kind of.

    All nice it comes with the cover yes. That is nice song seems. All pretty good quality got a nice little have honor up. Some of those slide up. And down one doesn’t move. That can mess with your rhythm sometimes yes. All right we’re gonna try up today give. How well she cuts give her a test on the ice yes. It comes with the owners owner’s manual here oh yeah there. We go see what we got in there. What I’ll probably have. All your replacements probably comes a little warranty oh yeah. That little warranty thing in there it’s not much it’s like just. One page booklet limited warranty limited. How long that’s micro print. Ican’t read it yeah looks like for all their products oh okay so check blade screws before. And after each use to make sure. They are tight looks like.

    You got two types the laser. And the Mora not sure. What the Mora is but I’ll look into. It looks the laser is a little. More expensive so that’s definitely the better. One of the two Sol yeah. Iwould probably get the laser for sure but I’ll look into. That baby’s type eight millimeters I’ll turn off of there. We go check this side yeah quarter-turn there. We go she’s nice and tight alrighty so. What you have an eight-millimeter yeah so the manual says tighten your blades check blade screws before. And after each use to make sure. They are tight It looks like we got about a good nine ten inches ice here for sure. You can see that thing just ripped through their out of. That feel everything pretty good okay nice and smooth okay. We got the six-inch auger out here but.

    We realized we maybe should the six into work. We should have got a seven-inch oh yeah we’ll bring some fish today well sure but the six inch for fishing here in Sheboygan for your trout Northern Neck six inch will work that’s as small as. You want to go but yeah. We should have got the seven that’s quick nice six inch holes yes just fine yes those are. Some nice sharp blades man the laser yes let’s cut nice and. These handles nice and on their nice not a lot of effort to use. It over have it just under a hundred bucks yep that’s a good price economy ice-fishing. That seemed like it works pretty good for. Us great yeah more inexpensive way to start ice fishing yeah well we’re gonna check. This is uh she’s cutting through a foot of ice no problem work out to. You get down to that bottom a lot smoother transition that’s the ticket waiter not twice makes. It a lot smoother breakthrough transition okay. We just cut through four holes like. Nothing and that’s a foot out here we’ll do.

    Quicker Oh Shannon’s out of juice 1 2 3 4. This is our fifth hole oh yeah 6 full there. We go whoo 6 holes in about 6 holes no problem real quick makes. This baby’s punch nice. On a smooth-running not jerky. You feel that clean out. That while you’ll get to the bottom the water’s coming up its gonna bind up no matter. What really nice the StairMaster six inches on. This auger yes I’m very impressed with. Iwould recommend for Sheboygan fishing area here the rivers. And the marina I would use the seven RT 8 but the six works just fine tool just a little small especially on cold days like today on its 23 bowl you’re gonna lose an inch yeah so inland then. You could use would be perfect for the inland you’ll bring up oh yeah you’ll bring a forty 40 inch. Or the thing is we got trout here. They get big they could get big. Most of them are gonna be five ten pound rates.

    You know ninety percent of them so yeah they’ve inland the six inch. And then the bare minimum out here for Sheboygan. Or the Great Lakes these big trawler inches the seven are the eight. You know the bigger the auger a little. More friction you’re gonna have. Ithink we’re gonna order up. Another auger but these laser the StairMaster laser auger is awesome it’s look at. That cut through there so. Ithink we’re gonna yeah we’re gonna bump her up to eight inches. Once that’s the biggest. You can get they got our light to be carrying around at 40 Paul gas lager. All righty we’re gonna move. Some beats are on and hopefully. We get a fish little 6-inch hole okay 25 below zero out here we’re on the Sheboygan marina it’s December 31st New Year’s Eve happy new years fans. Is a little truck down here we’re not Tucker a model little bit. It is brutal out here today at. It sure is it cold oh yes we’re on an arctic blast here for the last week oh yeah there.

    He goes he’s got some energy. He don’t like the look at. Us whole hey come on there. He is oh boy Louise a nice little guy yeah it’s hard to see our hole got really small yeah it’s right at sunset yeah a nice moon behind. You yeah that before. And it’s almost a full moon here. We go ya know that northern pike bit through the line yeah Oh your video oh yeah well. That happens hey we do a lot of fish in. And not catch we do know there’s an earth-sized bra just got oh there’s an artificial doll. That in here it’s not a small hole got a Tucker long yeah. All right we’re hoping for at least. One third a 6-inch hole of andrel yeah. We went a little too small. We should’ve went with the seven. Or the 8-inch seven would have been the minimum, but we’re gonna tuck her mouth got. Some spunk — oh man. And Bill you caught a 30-inch northern today right yeah in two hours not bad good catch.

    And release we had a northern pike on hit snapped the line bit right through the line earlier huh. Another 20 30 yards. They yell with our chick hey Tyrone there. We go headfirst Josh yeah. Iwant to be gentle with him get them through. All oh yeah don’t force them to tuck her mouth don’t get him tired yeah. We do our six hole here today. It froze up as you can see down to about a four-inch hole. When it’s 25 below zero. You only get about three hours on a hole that’s your max he’s gonna come headfirst. This time yeah it’s a nice problem look. You gotta get their head through. That hole we’re gonna get. This eight inch hand drill for out here six inches is the bare minimum that’s better for the inland. If you’re gonna fish for northern pike. And your pan fish but out here in Sheboygan for our trout a seven eight pounder oh yeah definitely about five. And a half six bro yeah yes what’s up. What a beauty Emily of. He buried ad hook real good that’s. What we need okay the cameras in the red we’re dying here.

    That was with our little 6-inch hole that’s at least a five pound trawl. We do have a scale we can measure. If I’m telling you that’s over five that’s over five pound truck yeah beautiful brown chalk Happy New Year’s Eve guys good again oh yes your boy in Wisconsin excellent.

    Oh alright you checked out. This video cuz you want to know. More about the StairMaster laser hand auger. This is the six-inch model weighs around eight pounds. It comes in four five six. And eight inch models. What I like about it comes in two pieces so. You can take it apart for easy portability. It adjusts from 48 to 57 inches right. Now it’s in the tallest position for me I’m six four but. You are shorter you can move. This wingnut down so it’s easier for you to drill a hole it’s got two rubber handles. And it’s made of use. They use a powder coated paint to reduce ice buildup. Ialso bought this model. It goes well with the ice auger cordless drill adapter. You can check out the review for this here there also be a link in the description below to purchase. It on Amazon this is designed for this model. This blade is 7 inches around so. This is a 6-inch ice auger so. If your auger does go through you’re not gonna lose your auger but overall.

    If you’re in the market for a hand auger. You don’t want to pay a lot of money for Anil’s. Something like that check out the StairMaster laser auger enjoy the rest of the review. And then you wanted to have. It shorter just put. More for a shorter person. If they wanted to use the auger again it’s the StairMaster laser 6 inch hand augers. This is a really nice auger it’s portable it’s 2 pieces. And weighs about 8 pounds. It comes in 4 5 6 and 8 inch models. If you’re looking for a nice portable hand ice auger. Isuggest checking this. One out the 6 inch is about 90 bucks there’ll be a link in the description below to purchase.

    You enjoyed this video subscribe to my channel check out my other videos. And until next time Oh.

    Hey folks Mike Potter with lake state fishing we’re. All out on the crowing County Lake today it’s November 30th we’re checking out the ice conditions today. Igot my new StairMaster synthetic laser hand auger. And we’re just going to check out the ice conditions here I’ve got about three inches of ice. This thing sure cuts through. It real quick I’ll give. You guys a little demonstration here. This is a great product. Iinvite you to check out strike master com2 check out the auger. And other great products thank you.

    And augers have been. And always will be a trusted tool used by die hard ice anglers early. And late in the season. Or anytime ice thickness is limited savvy ice anglers reach for their fast cutting and lightweight StairMaster laser hand auger over a power auger every time for a very simple reason it’s the right tool for the job but not just. Any hand auger will do the ability to travel light. And accomplish the task at hand with a minimal amount of gear makes a StairMaster laser hand auger the ideal hole punching companion available in sizes from four to eight inches in diameter a laser hand auger weighs as little as 55 pounds. Yet with a few twists of the cushion ergonomically designed handle the twin chrome alloy stainless steel laser blades pop a hole open in record time. All laser hand augers offer adjustment from 48 to 57 inches StairMaster hand augers are. Then arm powered drills their precision instruments for diehards. That appreciate lean power. And high performance pick up a laser hand auger. How StairMaster is bringing hand drilling out of the dark ages StairMaster the fastest lightest. Most powerful line of augers on the ice.

    Apply now

    Jiffy E-6 Lightning Electric Ice Auger

  • Eliminates smoke and gas fumes
  • E-Z Starting with squeeze of the handle
  • Wide stand control handles ease fatigue
  • Reverse feature eliminates hole skimming
  • Integrated USB charging port for electronics
  • Drill new fishing holes inside your ice house without fear of smoke or gas fumes with the Jiffy E-6 Lightning Electric Ice Auger. E-Z Starting with just a squeeze the control lever to start. The 42-volt/6 amp lithium ion battery gives superior drilling power with quick and easy mounting and removal. Reverse feature eliminates the need to skim out your ice hole and Night Lights allow for drilling in the dark. Integrated USB charging port also lets you charge cell phones and other small electronic devices. Wide stance control handles gives better control with less fatigue. Jiffy’s superior cutting technology and ripper blade cuts through dirty ice better than the competition. HD Planetary Transmission provides a lifetime of trouble-free operation with greater efficiency. Quick Connect Collar makes drill assembly mounting and removal easy. EZ Snap Blade Protector keeps both the cutting blade and drill head safe during transport and storage. Limited warranty covers power head and drill for two years and battery for one year from date of purchase. Replacement battery sold separately.
    Sizes: 8”, 10”.



    Apply now

    StrikeMaster® Lazer Replacement Blades

    Replacement blades for StrikeMaster Honda-Lite, Lithium Lazer, Lazer Pro™, Lazer Mag™, Electra Lazer™ Ice Augers.
    Sizes: 6″, 7″, 8″, 9″, 10″.
    Cancer and Reproductive Harm- www.P65Warnings.ca.gov.


    Apply now

    StrikeMaster® Cordless-Drill Adapter for Power Augers

  • Use an 18-volt cordless drill as a lightweight, efficient power ice auger
  • Fits drills with min. 1/2″ chuck
  • Convert an 18-volt cordless drill into a lightweight, efficient power ice auger. With the StrikeMaster Cordless-Drill Adapter for Power Augers. Forget about dragging a cumbersome gas-powered auger with you to do the same job. Adapter fits drills with minimum 1/2″ chuck. Power auger sold separately.
    Apply now

    StrikeMaster® Single Chipper Ice Drill Assembly

    Slice through the ice with StrikeMaster’s Single Chipper Ice Drill Assembly. Fits Magnum, Chipper Magnum and Chipper Lite models. Boron steel chipper blades.
    Available: 8.25″, 10.25″.

    Cancer and Reproductive Harm- www.P65Warnings.ca.gov.


    Congratulations on the purchase of your new StairMaster ice auger let’s go through the Assembly of the power auger the Assembly of your new power auger is really simple first thing you need to do is take. All the elements out of the box next. You need to make sure your blades are tight. And secure do this by first removing the blade cover. And be very careful around the blades. These things are really sharp. You don’t want to cut yourself then with the clothes then eight millimeter wrenches just check. Each of the nuts makes sure they’re tight. And the blades are on their securely it’s a good idea. Any time you’re out iced fishing to carry with. You an eight millimeter closed-end wrench. And occasionally check the blades. If the blades get loose is gonna negatively impact the cutting performance of the auger always make sure. You put the blade cover back over the blades. Each time you’re not using the auger the next step is to remove the black plastic shipping cap found on the shaft of the power head next you’ll see an Allen wrench taped to the shaft of the auger just pull the tape off. And remove the allen wrench. Now with the Allen wrench take the collar bolt out from the top of the auger. Once you’ve removed the Collard bolt you’ll see there’s a black cap on the end of the auger. This cap you can twist. You can spin even pops off the key here is. You need to make sure. This big hole on the black cap lines up with the big hole on the auger so make sure.

    You get those two things in line the next step is going to be to attach the auger to the power head simply slide the auger onto the shaft of the power head. And rotate the auger until. You get the holes to line up that’s. Where the Collard bolts gonna go so after. You have these holes lined up insert the Collard bolt through the large hole in the auger. Now take the allen wrench. You removed from the auger earlier. And just tighten once you’ve tightened the collar bolt down with the allen wrench. You can keep the allen wrench on the power head underneath the throttle. And you’ll find a little clip you’re going to slide. That Allen wrench in there. You can carry all times it’s a good idea. Each time you go ice fishing just to go ahead. And check to make sure. That the auger is secure on the power head. You get loose play in. It’s negatively impacted cutting performance of the augurs so. Each let me go ice fishing just pop the little allen wrench off tighten.

    It down you’re gonna be in good shape.

    Apply now

    Nero Hand-Auger Blades

  • For your Nero Hand Auger
  • Two razor-sharp stainless steel blades
  • Keep your auger slicing through hard ice like it’s butter. Nero’s Hand-Auger Blades are made of razor-sharp stainless steel that makes quick work of ice. For use with Nero’s Hand Auger (sold separately). Per 2.
    Available: 6”, 7”.
    Apply now

    StrikeMaster® Low-Smoke Two-Cycle Oil

    Specially blended for premium performance with power augers and other air-cooled two-cycle engines. It reduces exhaust smoke for less pollution and improved operator safety. Mix one bottle of oil in 1 gallon of gas (mixed ratio is 40:1).
    Cancer and Reproductive Harm- www.P65Warnings.ca.gov.
    Apply now

    Jiffy Pro4 X-Treme Ice Drill

  • Propane powered for use in a shelter
  • 49cc OHV Four-stroke engine
  • Wide stance for less fatigue
  • Heavy-duty aluminum-cased transmission
  • Five-year limited manufacturer’s warranty
  • Clear your ice shelter of gas cans and fumes with the Jiffy Pro4 X-Treme Ice Drill. It’s propane-powered for easier starting with no choking or priming. The clean-burning fuel eliminates maintenance and is safe to operate inside a shelter or ice house. The 49cc OHV Four-stroke engine is the most powerful available and delivers maximum performance for quick drilling in any condition. Wide-stance handles give good control with less fatigue. Heavy-duty aluminum-cased transmission increases durability and performance. Cast-aluminum-propane tank holder for easy mounting and removal of the tank. Propane fuel delivery system adds durability and performance. STX Stealth Drill Assembly uses three cutting blades for fast, easy drilling. E-Z Connect blade protectors keep blades sharp and safe during storage and transport. Five-year limited manufacturer’s warranty.
    Available: 8”, (32 lbs.), 10”, (35 lbs.).
    Apply now

    Nero Hand Augers

  • Offset handles fold for easy transport
  • Telescopes to the length of a full-size hand auger
  • Razor-sharp stainless steel blades
  • Universal drill adapter
  • Get your ice auger to the frozen lake hassle-free. Nero’s Hand Auger boasts offset handles that fold up for convenient transport. Plus, it telescopes to the length of a normal hand auger, allowing you to power through ice. Razor-sharp stainless steel blades slice through ice like a hot knife through butter. Universal drill adapter for use with your rechargeable drill.
    Auger extension: 22”.
    Available: 6”, 7”.

    Cancer and Reproductive Harm- www.P65Warnings.ca.gov.
    Apply now

    StrikeMaster® Lazer Drill Assembly

  • Replaces your worn, dull auger drill
  • Compatible with all StrikeMaster Lazer Augers
  • Available in a variety of sizes to fit your needs
  • Replace your worn, dull auger drill with StrikeMaster’s Lazer Drill Assembly. Compatible with all StrikeMaster Lazer Power Augers including: StrikeMaster’s Electra Lazer Auger, Honda-Lite Auger, Lazer Pro Auger, Lazer Mag Auger and Lazer Lithium Auger.
    Available:
    • 6″ Drill Unit.
    • 7″ Drill Unit.
    • 8″ Drill Unit.
    • 10″ Drill Unit.

    Cancer and Reproductive Harm- www.P65Warnings.ca.gov.


    Congratulations on the purchase of your new StairMaster ice auger let’s go through the Assembly of the power auger the Assembly of your new power auger is really simple first thing you need to do is take. All the elements out of the box next. You need to make sure your blades are tight. And secure do this by first removing the blade cover. And be very careful around the blades. These things are really sharp. You don’t want to cut yourself then with the clothes then eight millimeter wrenches just check. Each of the nuts makes sure they’re tight. And the blades are on their securely it’s a good idea. Any time you’re out iced fishing to carry with. You an eight millimeter closed-end wrench. And occasionally check the blades. If the blades get loose is gonna negatively impact the cutting performance of the auger always make sure. You put the blade cover back over the blades. Each time you’re not using the auger the next step is to remove the black plastic shipping cap found on the shaft of the power head next you’ll see an Allen wrench taped to the shaft of the auger just pull the tape off. And remove the allen wrench. Now with the Allen wrench take the collar bolt out from the top of the auger. Once you’ve removed the Collard bolt you’ll see there’s a black cap on the end of the auger. This cap you can twist. You can spin even pops off the key here is. You need to make sure. This big hole on the black cap lines up with the big hole on the auger so make sure.

    You get those two things in line the next step is going to be to attach the auger to the power head simply slide the auger onto the shaft of the power head. And rotate the auger until. You get the holes to line up that’s. Where the Collard bolts gonna go so after. You have these holes lined up insert the Collard bolt through the large hole in the auger. Now take the allen wrench. You removed from the auger earlier. And just tighten once you’ve tightened the collar bolt down with the allen wrench. You can keep the allen wrench on the power head underneath the throttle. And you’ll find a little clip you’re going to slide. That Allen wrench in there. You can carry all times it’s a good idea. Each time you go ice fishing just to go ahead. And check to make sure. That the auger is secure on the power head. You get loose play in. It’s negatively impacted cutting performance of the augurs so. Each let me go ice fishing just pop the little allen wrench off tighten.

    It down you’re gonna be in good shape.

    Apply now

    Cabela’s Auger Hauler – Large

  • Fits all power ice augers with blades up to 10″ in diameter
  • Crafted of super-tough polyester with a polyester-reinforced liner
  • Newly designed to fit current auger models
  • Newly designed to fit current auger models, Cabela’s Auger Hauler protects your vehicle and gear from sharp blades and oil residue. Crafted of super-tough polyester with a polyester-reinforced liner for years of dependable service. Internal storage pocket for spark plugs, wrenches and other necessities. Heavy-duty, full-length zipper. Fits all power ice augers with blades up to 10″ in diameter. Nylon web handles. Imported.
    Overall length: 60″.
    Auger head width: 27″.
    Cancer and Reproductive Harm- www.P65Warnings.ca.gov.
    Apply now

    StrikeMaster® Lazer Blade Guard

  • Protects the blade edges and your equipment
  • Constructed of ultradurable molded plastic
  • Attaches to your auger with a sectioned rubber cord
  • Fits both hand and powered assemblies
  • Protect the blade edges of your Lazer Drill blade assemblies and your equipment with StrikeMaster’s Lazer Blade Guard. Constructed of ultradurable molded plastic. Attaches to your auger with a sectioned rubber cord. Fits both hand and powered assemblies.
    Available: 4″, 5″, 6″, 7″, 8″, 10″.

    Cancer and Reproductive Harm- www.P65Warnings.ca.gov.


    Hey I’m Tony roach for fish USA. It comes to ice fishing no doubt about. It drill more holes catching more fish keeping your blade sharp. All winter long is a must. Idrill thousands of holes on the same set of blades but. You know what I keep my blade sharp. One quick tip for you is adding a blade guard putting. That blade guards on every time. It in the back of your truck in an ATV. And a snowmobile but adding. That blade guard will keep those mora blades laser sharp. And I’ll keep you cutting all winter long regardless of where you’re at in the ice belt. What type of drill you’re using by putting. That blade guards on there is going to ensure. You can cut thousands of holes. Idon’t care you use a hand auger a lithium laser. Even a gas auger by putting. That blade guards on there it’s gonna insure. This thing cuts time. And time again putting you on the fish hey I’m Tony Roche for fish USA good luck fishing.

    Apply now

    StrikeMaster® Auger Storage Bracket

  • All-metal construction
  • Stores your auger in an upright position
  • Two lag screws secure to your wall’s stud
  • StrikeMaster’s Auger Storage Bracket’s all-metal construction conveniently and safely stores your auger in an upright position. Two lag screws secure the bracket to your wall’s stud.

    Apply now

    Jiffy Model 30 Gas-Powered Ice Auger

  • Easy starting, even in extremely frigid conditions
  • Wide-stance comfort-grip handles provide safe handling
  • Heavy-duty HTT transmission with heat-treated steel gears
  • Powder-coated XT drill assembly features a serrated ripper blade
  • Power through ice with ease with Jiffy’s Model 30 Gas-Powered Ice Auger. Easy starting, even in extremely frigid conditions. The powerful 52cc two-stroke engine delivers maximum performance in any drilling condition. Wide-stance comfort-grip handles provide safe handling and less fatigue. Heavy-duty HTT transmission with heat-treated steel gears increases durability and provides trouble-free operation. Powder-coated XT drill assembly features a serrated ripper blade and a centering point for quick, reliable drilling. Quick-connect collar provides easy mounting and removal of the assembly. E-Z Connect blade protector keeps blades sharp and safe during storage and transport. Manufacturer’s five-year limited warranty. Made in USA.
    Sizes: 8″, 10″.

    Cancer and Reproductive Harm- www.P65Warnings.ca.gov.
    Apply now

    Cabela’s® Hand Ice Auger Replacement Blades

  • Stainless steel blades and hardware
  • Blades are extremely sharp and durable
  • For Cabela’s or Bass Pro Shops hand augers
  • These Cabela’s Hand Ice Auger Replacement Blades are designed for use with Cabela’s or Bass Pro Shops Hand Ice Augers only. Crafted of stainless steel, they are extremely sharp and durable, and will have your ice auger cutting ice just as quickly as it did when it was new. Includes 4 stainless steel screws. Package contains 2 flat blades for refitting 1 auger.
    Available: 6″, 8″.



    Cancer and Reproductive Harm- www.P65Warnings.ca.gov.

    Apply now
    Alex Hint

    Hello! I'm Alex, an experienced outdoor dude who is passionate about the active lifestyle and spending time in nature. It doesn't matter if you are a beginner or an expert. I do dozens of reviews for camping, fishing, and hunting products. They may be of use for anyone who wants to have a great outdoor time.

    Comments are closed.

    Share
    Published by
    Alex Hint

    Recent Posts

    • Activities

    How to Make the Dakota Fire Pit?

    There are many interpretations of this type of hearth - deep, hidden, pit, Polynesian. But in common parlance, the Dakota…

    1 day ago
    • Camping

    The 7 Best Camping Showers Review

    Ivation Portable OutdoorWolfWise Pop-up TentDOTSOG Portable Outdoor SolarTexsport Instant Portable Privacy ShelterFeChiX Portable Solar BagRISEPRO Portable ShowerHead PumpIron Hammer Portable…

    2 days ago
    • Camping

    The Best Canopy Tent for Wind

    CLAM Quick-Set 6 x 6Coleman Sunwall Accessory for 10x10ABCCANOPY Outdoor Pop up TentQuick-Set Escape 12x12 ft. PortableMASTERCANOPY InstantTOP #1 CLAM…

    2 days ago
    • Hunting

    Budget AR15 Red Dot Review

    CVLIFE 1X22X33 20mm RailFeyachi Reflex Sight - Adjustable ReticleFeyachi RDS-25 Dot Gun SightOzark Armament RhinoCVLIFE 1x22x33 Reflex SightOTW Dot Sight,1x20mmAT3…

    2 days ago
    • Camping

    The 9 Best Blankets for Winter Camping

    Arcturus Military Wool Blanket Get Out Gear Down - Puffy, Packable Woolly Mammoth Woolen Co. | Extra Large Merino Wool…

    2 days ago
    • Biking

    The Best Bike Tire Patch Kit

    Mini Pump & Glueless Puncture RepairPark Tool VP-1 Vulcanizing Set of 6Slime 20040 SKABS Pre-GluedRocRide 16-PC Inner Tube RepairBicycle Repair…

    2 days ago

    This website uses cookies.