Best 19 inexpensive Ice Fishing – Rods, Reels, & Tip-Ups

si eres ah próxima macroservice clase demarcaciones ruidos integrales y bengasi y huelva en él gracias para la comunidad sí marinas la gente el verde así se haga.

We are disassembling an Eagle Claw inline ice real first thing v2. This is simple this knob here there’s a spring under. It sees there is a small spring well on the tools. That I’m using for this are going to just be I’d like to use a pic not. Everybody has a pic at home but. This is for me to get in. And move small parts. When your fingers just too stubby. And big to get into the Mario’s a no delicate pair of pliers. Any fires would do I suppose but there’s. Some pretty small screws. That you’re gonna want to grab into they’re going to need a small Phillips head screwdriver. And we’re gonna be put in. Some Treville sub-zero grease in there so there’s. This sitting off to the side. They could say I already done. Once before here so. We move along relatively quick next up is. This not being held on here we’ll loosen. This bracket keep all your parks organized so you’re gonna have to put. It back together on your own I’m going to just use my pick just to grab. And start turning them not. It actually turns them up for you. And loosens all right got to get a little closer to the camera here. And I’ll take the handle off. You have this fruit free reel. Or the drag wheel you have to remove the reason. Itake apart this side first is reason having the spool on here kind of holds. All the gearing in place so. You can spin that off of their otherwise the whole thing likes to spin on. And save you a bit of time. And trying to figure. That check out off spin. All the way up and into our hand underneath here also be aware there’s a washer which then.

It is supposed to be like. It would be for cushioning your drag against your reel here okay so. Everything we can taken apart on. That side let’s flip the reel remove the cap be careful there is an o-ring that’s in between the stem here. And also the cap that we’re taking off there’s an old ring owning is important. When our gloves are hitting it. And the snow is hitting it in water’s head. It keeps a lot of that from getting inside beat spool there’s a lot of. That ice beside that could potentially get inside of. This pool you can see right here. We have the we have an old ring that’s sure. You can see that in the camera there. It was a whole ring right there it’s real easy just to insert the loop in here as I’ve done try to hope. It gets around inside of there but that’s not the case as. Ifound out so I need to take off.

This plastic shroud be careful not to lose. Any of the small pieces. All right have all loosened up. Iwant to carefully lift. Idon’t know I can use my fingers. Idon’t want to lose. These small screws here we’re gonna take. That we’re gonna set. That off the side as well just jumping ahead here inside. You lift that up you’ll see the rest of the gearing now. You can see everything got gooped up before. Ijust tried insert. And grease in there without taking the cover off. Ineed to get greased on inside of these there’s a gear cog here that’s attached to. This piece you turn with your real handle there’s no grease inside here. And also I’m guessing there’s a bearing system. Or sleeve inside of there as well to kind of help. It moves freely that could potentially be dry dryer Lube is not like.

It should be in there so to get in there’s. These small screws there’s four of them right in there. We go maybe that’ll pick. It up a bit it’s a crummy camera so let’s get. This out here and I’m actually gonna just tip. That screw out and number four. And I’m going to remove. This with my pliers pieces flying everywhere. You know we’ll set all off the side along with my small screws here okay next up want to be pulling this out. You can see what I am actually pulling over here. He flips up gently Snyder down to the side okay on. This piece I just pulled out a bunch of grease on their piece. Ijust pulled out there is a sleeve. It sits over there and there is a washer too. That goes on top of. That sleeve I got dog here in my reel.

Anyone else have a lamp there. You go alright so right here watcher goes up here. This sleeve goes up on there. All rides inside of bearing. That is inside of there. It looks pretty dry so. Iam going to loop that up I’m going to lube up my shaft. That the sleeve is going on to. And the outside of the sleeve make sure. All the points of contact are going to be lubed up so. That hopefully come. This winter time on the ice my reel retrieve will be back up the part. And I’ll get another good season out of my Eagle Claw inline ice real system is very good to use. It can still create backlash. You always have to manage your line on the ice.

You know don’t don’t pull out of here too quick. It does ain’t like a. It acts like a bait caster there’s an adjustment for your for. Each bait or refer. You know did say you’re aligned. Ilike to pull my line out yeah. Imight be able to set. That just enough to. When I’m pulling my line out. It actually has a little bit of tension so. That the line doesn’t just back roll on itself like it’s happened in the past but is their awesome little reels don’t let them go to waste. And hope this video helps.

The evil all right Miguel traveling rod case is made of high-density polyethylene has been dropped tested from poor feet. And tested down to a temperature of negative twenty degrees. It comes with double hinge latches to firmly secure the case closed. It comes with four locking points in order to lock the case to secure your rods. And combos inside the case there are four pieces of customizable foam. That can be moved within the case to accommodate. All of your two-piece rods. Or ice combos in this case. We currently have six ice combos up to 40 inches long. That fit in this case including the new inline Magnum. This will fit all combos from inline combos. And spinning combos. This will also accommodate up to six foot six two-piece combos there’s also slots within the case for small tackle trays. And there is plenty of extra space in. This case for your other fishing accessories you.

Everybody welcome to ICAST 2013 my name is al Newark. Or I’m with the right McGill company here. And I’d actually out of Denver Colorado. What I want to show. You today is one of the newest introductions. We have at this year’s ICAST it’s the Eagle Claw inline reel. This has so many really interesting features. And it’s a reel that is going to change the way. You fish for crappie. Ican tell that the people who have tried. They love what we have here is kind of hybrid reel to crossover between a spinning model a casting model. And a fly reel some of the key features are we’ve extended the foot up here so. You can easily put your fingers around the reel much like a spinning reel but. It looks like a casting reel in its round design as a casting style handle nice large star drag very smooth but powerful drag. It does have a clicker on. You need to set it with a clicker. You can kind of heart. That working for you right. Now but let one of the key features on. This reel many times. Whether your ice fishing or fishing for crappie. You want to be able to drop a very small lightweight jig straight down without. Any line twists spinning reels really don’t allow. You to do this reel does balls we’re gonna do is we’re gonna turn the reel to. This side so you can see. It easier we’re gonna push.

One little button in right on. That side now watch. You just spin that spool. You can realize how fast. You can drop a very lightweight jig straight down without. Any line twists that spool is still spinning we make. All graphite version so. It has a graphite body graphite frame. And a graphite spool. This happens to be the step-up model. It has a graphite body. And frame but it has an aluminum spool. And again very smooth as soon as. You want to set you just turn the handle. That much about an eighth of a turn. It stops at now you’re in the retrieve mode just. That fast the new Eagle Claw inline reel you’re gonna love. It got to get yourself.

Even called last year. We introduced a brand-new reel. And was really designed originally for the ice market but a lot of pan fish guys have seen. This real and immediately adapted to. It’s kind of hybrid between a fly reel. And a casting reel one of the best advantages of. It’s got a completely free spool type application. You push in the lever on the side of the reel. It in complete free spool. It allows you to drop the lightest jig down to. One sixty-fourth of an ounce. Even free spool all the way down to the bottom it’s also got a great drag. It picks up the line easily so it’s perfect for all those pant fish type applications especially. When you’re long lining out are using a real long rod. And just vertical jigging out into the pads. This is a great new reel so check.

And welcome to another edition of the man cave sessions I’m Bernie. Ifound a really cool tool out there on the market for you today it’s an inline real Eagle Claw came out with. These they’re really neat real kind of look like a fly real kind of look like a bait caster you’ll hold. It like a spinning reel so. Everybody one of the really cool things about. You like bait casters on the ice. You get tired or little eyes. That level wine part freezing up on. This does’t have you like to hold a spinning reel but the spinning reel twists you’re lying real bad. And it’ll get your jig spinning there in the water column which cost. Few fish this alleviates. You like fly reels but. You don’t like the way. They feel on your hand. You have the gap here to hold. More like a spinning reel it’s a really cool reel let. You the features of. It to put to get the free spool engaged. You got to do is push. That right there on the side.

And the free spool go see. How smooth that is that’s nice and then to tension that’s the free spool tensioning button is right here just twist. It just like you would a bait caster. You want to clicker on. It that’s right here it’s a really cool real Eagle Claw has them the inline ice fishing reel check them out at Eagle Claw calm thanks for watching.

Dan Tinting uncle al here. We got the 13 fishing Black Betty fail why do. They keep making fail videos for uncle L to report on so right off the bat let’s look at the literature. This should be the first clue welcome to the 13th family as uncle L knows. Now someone’s always about to Jackie O. This reel is built to perform blah blah blah nice beef service every six months to a year by a professional. And here’s the next fail Clearwater Florida. That doesn’t sound like a ghetto. It sounds pretty pricey so. And then they got warranty on the workmanship maybe. You have an older and it’s. You want to get rid of. You don’t like this might be a loophole so the magnetic drop system I’ve been trying to work on. What I’m going with so the other reels there’s a little rubber stop. What happens is that makes contact with the surface. You can adjust and out so. That little rubber stopper makes. You make your tension so. It doesn’t go all over the place so. This is a true free fall. Because the magnetic system the B F 24 has. Nothing to grasp on so. This magnet right here truly show. You it’s a good magnet. Another magnet will go down think right about Wow so decent magnets. Both of these, and we’ll try to pick up a spool barely in the center do. Any contact on the outer edge nada so to infuse metal into aluminum as expensive process.

And maybe the Taiwan factory just forgot to do. This is like a brake pad system to get. Any stoppage that has to make contact with the spool. Something has to make contact with the spool. And since they’re touting this to be magnetic. That magnets supposed to grab onto. Something so let’s go over. This real quick that’s at maximum which is. Another fail because water is gonna get in there. And you’re not gonna be able to adjust. This so that’s at maximum put. This back on pretty decent quality, so we’re locked up. And let’s see that there’s. Any stoppage no stoppage. And there’s the second fail so you’re driving along. You need to make a stop. You just want to use your transmission only. You would have to throw. It in reverse you would stop so same system with. This that’s like a little transmission. You want to stop you throw.

It in reverse well let. What happens just back off so there’s your gears. You push it in that’s. What makes it unspool. You bring it back in there’s. That soft brass what it engages on. It has two little tabs right there so what’s gonna happen those two little tabs are gonna deteriorate. Icould see it forced against like the natural braking system it’s supposed to be but. They just have those two tabs to lock into those which what’s gonna happen is that’s gonna wear out see. We can focus camera anyway trust. Me there’re two tabs right there overall good field see. We can get the magnets to yeah see the magnets are strong enough but the other. One so no issues with the magnets it’s just there’s no place anywhere except the middle which is not gonna gravitates towards to grasp on their total fail maybe they’ll give. You a new spool or figure out.

Something but there is no place for the friction to apply. Or the magnetic to grab. Idon’t know yeah pretty cool box pretty cool. Everything sadly uncle Al’s gonna have to return. Even think I’m gonna use. That whole system right there was. What I was planning on using that’s about 80% 90% of the function of the rail. You push the button your line drops. All the way to the bottom so. You need the tension yeah long story uncle Al’s out.

What I’ve got here is a polar tip up so it’s called an underwater tip up. And what’s nice about. This design is that it’s guaranteed against freeze up there’s a tube mechanism here I’m folding out there’s a shaft. That runs in here from the trip mechanism down to the spool. And that’s encased in a freeze proof lubricant so no matter. How cold it is no matter. What happens the trip on. This flag car switch. Whenever a fish bites turns the trip pops the flag up will not ever freeze up which is wonderful.

Ijust grabbed one of Dennis’s puller pop-up tip-ups here. And I’d really like to show. You just some of the features of. This tip up and really the beauty of. It is first of all it’s a fairly high profile tip up with. This long tube the tube sticks up its easy to see. Even in deep snow when the flags pop up here you’re signalling device. That comes up even further so it’s really a great unit. You can see it in a distance. If you’re fishing in deeper snow it’s easy to find and check for bites. Another thing that’s really nice about the popups is. This tube is completely enclosed. And sealed there’re no lubricants. Anything in here and it’s completely frozen proof it’s an underwater spool just like. Most of our standard polar type tip ups which means. That the line won’t freeze. Ihave to do to set. This is aligned the magnet with the bottom of the tube which also has the bottom of the shaft aligned on. When those two magnets are lined up. That holds the shaft in place. When a fish bites and the spool turns flight pops up its just. That simple no mechanical devices to freeze up no problems with wind no problems with. Anything just perfect simple easy to use system.

Cabala’s eye sleds and covers our ice sleds have made of highly durable polyethylene the utility sled has two built-in bucket holders the large sled has three out regulars. And large sled covers fit their corresponding sleds adjustable cinch cords zippered side entry points Cabala’s ice LEDs. And covers lifetime guarantee only at Cabala’s.

Cabala’s deluxe ice rod bags transports. And stores all your ice fishing tackle exterior pocket offers additional storage heavy-duty polyethylene shell oversized zipper pulls adjustable shoulder strap available in three sizes a four rod bag eight rod bags. And a 12 run bag Cabala’s deluxe ice rod bags only at Cabala’s.

Hi my name’s Andrew wheeler on the product manager faboo Garcia I’d like to introduce the Veritas 20 the Veritas 20 features our 30 ton graphite material. This gives you a very lightweight right in the hand that’s very sensitive rod also features our spiral carbon core technology spoiler carbon core. We take a very fine filament of carbon fiber that’s wrapped internally in the rod from butt to tip. That really gives you on average is a 22 percent increase in brake strength. And on average 30% increase in tip break strength. You compare it to the previous generation of Veritas rods we’ve been able to add. This strength increase without actually adding weight to the rod so. You still keep that very sensitive rod feel the new Veritas features a micro click hood design. This just allows you to really get your real tight onto the rod. It won’t come loose the Veritas 20 features our titanium frame guides with zirconium inserts. This gives you a very lightweight guide. That keeps that natural action of the blank Veritas also features a high-density VA. This just makes it a lot. More comfortable to fish with. And also allows you to have good light transmission through the rod the Veritas comes in 31 models features our standard line as well as our winch series which is our crank bait specific series a fog rod which allows. You to throw frogs into heavy cover. And also our micro guide series so.

If you’re looking for the ultimate in rods check out the new Veritas 20 from Abu Garcia.

All right you guys just a quick video here to help. You guys distinguish. Some things about Beaver Dam tip-ups. One of the questions. Iget asked a lot is. How to tell how old there. Ican’t really have a definitive way to age the Beaver Dam tip-ups the. One thing that’s going to stand out immediately is the older ones typically have a much darker finish on. This guy here these other two. You see here are brand-new last year for my son Nolan. He got them for Christmas he’s just started ice fishies age 7 but there’s. Some subtle differences between the two brand-new ones. One is brand-new they’re. Both brand-new out of the box last year but. One is brand-new one is called. What people advertising if. You go on eBay something you’ll see new old stock advertised. And I’ll show some of the differences to look for in new stock versus new old stock versus maybe. Something that’s a little. More vintage I’m gonna guess. One is probably 25 30 years old. Ipicked one up at an estate sale yesterday actually. And just judging by the amount of barn dust. And the type of line. That was on the spool it’s got to be 25 years old. More so we’ll pick this up I’m gonna try to get. It real close look at the spool for you guys so. You can see you can see good.

That a shake the line feeder spins completely free on there so that’s. One thing to look for another thing to look for is I’m gonna zoom right into. That spool it’s pitted it’s old it’s been in the water a bunch. And then it’s at a barn for a long time not being used as well so but the big thing is there’s no distinguishing markings on. That spool the only thing. That identifies this as a beaver dam obviously is the Arctic fisherman logo Beaver Dam Wisconsin well look at the new spools here as. Izoom in on it you’ll see. That rubber o-ring that just kind of keeps the line feed in place. You can see on the newer models they’ve actually stamped Beaver Dam ice fishing right into the spool. Now to distinguish brand-new versus brand-new old stock here is.

Something else you’re gonna want to take a look for the first thing you’re gonna see is blatantly obvious it’s no longer bronze it’s just a bare metal color the other thing that’s gonna tip. You off immediately is the bottom of. That spool I’ll zoom in on. You can see that one’s actually held in place by a nut that’s. Something that happened. Ibelieve after uncle Josh took over Beaver Dam tip-ups I’ll show. You the new old stock bottom just so. You can see what I’m getting in here no nut to hold. One in place that’s actually soldered on there. And the biggest difference. Both function identically ultra-smooth same exact tip up the only difference comes in later. You have to service. And real Outre cate them with the old new stock you’re gonna have to heat up.

This solder in the center. And actually melt you can pull the shaft out get the old grease out of there. And go ahead and put your new grease in there on the new ones it’s much simpler you’re just gonna go ahead. And take a little tiny socket wrench in there. And you’re gonna undo. One off you’re gonna find there’s. One behind that you’re also going to have to remove but it’s its just a much easier process in general. Because then you don’t have to resolder. You just reassemble. Everything give them a quick spin in a way. You go but anyways guys. That helps it comes to maybe identifying the age of. Some of your tip up obviously the darker finishes are gonna be older.

And you’ll see the difference in the lion guide obviously. And there’s no stamping on the spool whatsoever but hopefully. That guy’s helps you out I’m gonna make. Another video later on that’ll teach. You guys how to go ahead. And relocate the old ones. You got to get the solder off their hope. That helps you guys out a little bit see.

Another innovation from the tip up experts at HD enterprises it’s a revolutionary tip up light. That actually illuminates your entire flag wire. Now just like other tip up lights from the flag in a horizontal position it’s off. Whenever the flag pops up to a vertical position the light comes on. And you’ve got two options. Either have a flashing light. Or a continuous light. And again it’s not just the flag. Or a small light it’s the entire flag. Where that’s with any kind of night fishing at. One tip up light you’re gonna want to try.