Convergent Hunting For Picatinny Rail Phone Gun Mount
3"L x 4.5"W(open) x 2.75"H.
Wt: 2.4 oz.
Cabela's SD Pro Memory Cards
Available: 8GB, 16GB, 32GB, 64GB, 128GB, 256GB (not shown), 512GB (not shown).
Garmin® International Dash Cam 45
1.59"H x 2.21"W x 1.39"D.
Wt: 2.1 oz.
GoPro® Ball Joint Buckle
Go pro swivel mount here. It is spin it's kind of tough to spin by itself but get a little bit of it'll go back it's a little bit easier. You have it already in the mount. You able to put a little bit. More leverage on it so there. All the way back do. That way you don't have to switch up your mounts as much. You can turn all the way back around. You want it to face. If it's in a stationary position. You can kind of wiggle. It around to get the perfect shot from over there over here. Even get more of an angle but here. Ifirst got it out of the box. It was hard I had to slip. It into a mount and then turn. It broke free yeah it's easier to move 100% but. Me I'm gonna really enjoy the smell adios.
GoPro® Adhesive Mounts – Flat and Curved
Garmin® VIRB® X/XE Battery Pack
GoPro® The Strap
One of our most adaptable mounts. Yet The Strap mounts your GoPro to your hand wrist arm. Or leg This mount is unique. It allows for hands-free shooting That means. You can place 100% of your attention on. Whatever is right in front of. And The Strap does all the work Ready for a twist? The Strap features 360 degree rotation. And tilt so you can choose your angle on the fly Use. It to capture inventive POV immersive selfies. More of the up close. And personal perspectives. That made GoPro famous Both hand. And wrist configurations offer excellent stability. And control Like all GoPro mounts The Strap has been field tested in. Some of the world's. Most demanding environments It's also totally waterproof so. You can use it anywhere your camera can go To attach The Strap to your hand adjust the strap on the thumb side first From. This position you're free to angle the camera. Wherever you want Forward for follow cam. Or backward for selfies Either way. You won't see the mount within the shot Want to go totally hands free? Grab the wrist strap Attach.
It by threading the strap through the rotating mount hook side down No matter. What you're holding on to the camera won't get in the way For. Something completely new reach for the arm. And leg strap Because. You can attach it to your arm leg. Or larger objects you can find new one-of-a-kind angles for all of your favorite activities Compatible with. All GoPro cameras The Strap features 360 degree rotation. And tilt for a full range of adjust ability. And control Use it to capture hands-free POV surefire selfies. More unique GoPro perspectives. That have never been possible before.
Cabela's Micro-SD Memory Cards
Available: 8GB, 16GB, 32GB, 64GB, 128GB.
GoPro® Jaws Clamp Mount
You hey folks captain Dave here. Imade mention that. Igot to do GoPro Jaws with the Flex arm. Ithink they're referring it as the GoPro Flex jaws. Now there's many a review on. This product already today is the first day. That I've used mine. And I'm really impressed. This thing for me I do videos on boats out on the water with my customers with my charter customers. And what really I need. Iwanted something. That was super quick change an angle change an angle. Iget a different shot real quick I've got camera booms. Or poles or whatever. You want to call it. And I've got various mounts. All around the boat but still. What it really comes down to. It you need something like. This I needed something like. This and there is other products like. It so GoPro is kind of. You know they kind of copied. What was out there okay I've seen. You know a clamp like. This with a flexible jaw already but the big difference is.
That does it have the GoPro mount the clip mount here. You take this off there's your standard GoPro clip mount on there. And there's the receiver base. Iguess you could say which is identical to up top here. And you put this in. And it's very secure. And I can't you know I'm thought. That I can't believe. That it's made this well but. This is a real quality product the grip is super strong. And inside here is kind of zip strip thing and. You can close this up okay. This little loop right here. You can close that up so. When you grip down it's ripping on the backside as well as the front side. And everything else. Now I've got dolphins jumping around over here so it's very versatile okay.
And then you can open. This gripper all the way up. And then they got a nice little slot right there. Where you kind of take the old tag end. And hide it rights in there. And your camera of course goes on very easily I'm using a J buckle mount here it's. Because the only one. Ihad on the boat with. Me this morning and there. You go so there it is. And squeeze this it's really strong. And you can put the camera almost anywhere I'm not going to go into a lot of details about. It for the sheer fact. That there's a bunch of YouTube videos okay reviewing this already there's a lot of reviews on Amazon that's.
Where I got mine and let. Me tell you something Amazon has. It for $10 less than everywhere else. Imade mention that. Iwanted another one so guess. What I got too I got. Another one coming with the new tripod base. Because the pole that. This camera is on right. Now what I'm going to do is put a tripod base on. It okays and then of course I'll have my camera up here. And I will put the tripod base on then on my camera pole I'll also be able to flex around. Now what it doesn't do is. It doesn't really you mean. You go to turn it doesn't swivel okay but soon as. You stick it in here. You get some turn out of. It okays see how that's straight. And this is turning so it's. All in how this flex arm works okay but. What you're going to see is the rest of. This video is some unique angles. That I really haven't gotten before. Imean not not a ton of them but.
Some unique angles that. Ijust haven't gotten before. And the thing about. It is I don't even bring my suction cup anymore hell with. That thing this snaps on. Anything that's about two. And a half inches in diameter so. This really works better for me. Than the suction cup. Inever really trusted the suction cup in truth. And I even got a big tether for it so you'll see. Some various angles. This is one review. If you want to call. This a review of the GoPro jaws flex arm here. That is done on a boat I'll show. You some various angles. And a little bit of fish catching at the same time so Amazon best deal I'll put the link in the bottom of the video. Ithink it's 40 bucks. You can everybody's charging 50 bucks for this. And I think even on eBay it's usually 50 bucks. You go to GoPros website it's 50 bucks its MSRP Amazon has got. It out there and we know. That quick delivery with Amazon. Ilove Amazon and I love eBay. Igo back and forth. And I see which were.
And how can I get the best deals with free shipping on. All my GoPro stuff and. All my fishing tackle so I'll show. You a few of these different angles. And how quick and easy. It is to attach this I'll be right back people t-tops. You can mount this. All over inside your key top inside a cabin boat, so I'm going to show. You a couple others. And I really recommend the GoPro jaws flex arm here 3995 on Amazon it's. One of their best mounts ever it's a great handle to you.
Spypoint® Xcel HD2 Hunt Action Camera
1.7" H x 2.4" W x 1.6" D.
Wt: 5.7 oz.
Tactacam Stabilizer Mount
- 2.0 – Colors/camo: Flat Black, Next Camo® G1 Vista™.
- 3.0/4.0 – Color: Flat Black.
Garmin® VIRB®-X Archery Bow Mount
Garmin® VIRB®-X Tripod Mount
Spypoint® Xcel Curved Adhesive Mount
Tactacam Rechargeable Battery
- 2.0 – Fits the Tactacam 2.0. Provides up to two hours of runtime. 1,100mAh.
- 3.0/4.0 – Fits the Tactacam 3.0 and 4.0. Provides up to 2.5 hours of runtime. 1,350mAh.
GoPro® Handlebar/Seatpost/Pole Mount
Today we're looking at the hammer bar seat post pole mount from go pro. This mount has had quite a. Few upgrades since the last time. Ilooked at and a couple of the problems. Icomplained about have been fixed so what's included with the GoPro handlebar roll bar pole mount kit well first off there's the good old handlebar roll bar mount that's. This thing right here — GoPro bolts a long. And a short one a 3-way pivot arm. And the new addition the two rubber inserts. These are really cool. They were desperately needed the old mount used to have no rubber on the inside of. It the roll bar mounted. You remember has plastic. And sterling inside of. You have a bar mount head no rubber on the inside of. It still doesn't this meant. That mounting onto anything metal was almost impossible. And the mount would move around like crazy.
We would overcome this problem by using parts pieces of old biking or two. Something like that to just add a little bit of rubber to the inside to counsel out. Or to add some friction to the mount didn't move around too much with. These new pieces you can actually take them. And then they have. These rubber knobs at the top which jam into the roll bar mount. Or into the handle our mounts are just like. And then make your roll bar mount. Or your handlebar mount way. More secure so you start by wrapping the rubber piece around. Whatever you're mounting on to. You make sure that it's tight around there. And then you do up the handlebar mount the other really cool addition is the thicker.
You have tried to mount your handlebar mounts to the pointy end of your ski pole. What you've probably found is. It doesn't actually go small enough to get a good grip. You could overcome this by wrapping it in rubber. Or duct tape something like. That but with this new piece. You can insert in here. It greatly reduces the grip size of the diameter. Or the handlebar mount will grip onto. It makes it small enough to grip on to the small end of a ski pole. That is super cool so. These two additions are huge. They will work with the old handlebar mount so the an old handlebar mounts have the same two indents. One has which means. That using these are pieces with your old handlebar mount is still possible the addition of these two rubber pieces has just about fixed my biggest complaint about the hand lower mount. That was the ability for the mount to just spin. And move when mounted to a bike handlebars. This on a bike it would. Most the time just fall in your camera would end up facing down.
Because like I said there's just. It was metal on plot hard plastic. And there was no grip there so. We had to do some with. That was pretty annoying with the addition of these two pieces. They fixed, and they've also fixed my other complaint was which was. It did not work on the end of a ski pole so by the addition of. This piece they have made. That possible I don't feel. That the GoPro handlebar mount is a critical piece of gear for your kit. You want to mount on to bike tubes. And handlebars of bikes. This is definitely a valuable mount for you but. Idon't think it's something. That every person who owns a GoPro is going to require pole mounting if you're going to get. And then buy a pole just mount. It on to may be looking at a dedicated GoPro pole would be a better option.
You do want the versatility. That comes with this then that's great. It is a really cool. And useful versatile mount. One other things you guys can look at is my DIY handlebar mount using a hose clamp it's a little bit harder. More time-consuming to mount. This but it is just about as secure so that's a really cool mount. You can find that link in the video description guys. This was another GoPro tips. And tricks video if you've enjoyed. It pleases make sure. You subscribe to check out my channel for lots. More videos and like the video. You have any questions. Or comments you can leave them down below. Iwill be sure to read them. And to respond to as. Ican until next time guys thank. You very much for watching you.
Pelican Action Camera Case
Single camera with accessories
Interior: 9.5"H x 7.5"W x 4.25"D.
Exterior: 11.8"H x 9.8"W x 4.7"D.
Double camera with accessories
Interior: 9.5"L x 7.5"W x 4.25"D.
Exterior: 11.8"L x 9.8"W x 4.7"D.
Three camera with accessories
Interior: 13"H x 9.2"W x 6"D.
Exterior: 14.2"H x 11.4"W x 6.5"D.
V.I.O. POV HD Accessories
- Power Source – Never worry about running out of batteries again. This handy unit provides power to your POV HD camera from external 12-volt sources found in autos, motorcycles, boats and more. Includes a 12-volt power outlet adapter cable and direct hard-wire cable with SAE connection.
- Ultra Clamp – This durable clamp securely mounts to a wide variety of surfaces. Opens from 1/8" to 1-5/8". The Tripod Adapt Mount (not included) perfectly mounts your POV HD camera to the Ultra Clamp. Your recorder easily adapts to the Ultra Clamp when used with the Power Source (not included).
- Ram Suction Clamp – Its suction cup creates an extra-strong hold on any smooth, nonporous surface. This makes it perfect for attaching to the side of your boat. The 2" adjustable arm adds even more flexibility for angle adjustments. Its 1/4-20-threaded male connection perfectly fits the Tripod Adapt Mount (not included).
- Camera Pouch (not shown) – This versatile pouch keeps your POV HD recorder protected and secured to your belt, pack, vest or anything with a strap. Allows access to LCD screen, buttons and I/O port.
- Tripod Adapt Mount (not shown) – This adapter plate and camera clamp holds your POV HD camera in a rock-solid grip. Its adapter plate secures to the Ultra Clamp (not included), the Ram Suction Clamp (not included) or anything with a 1/4-20 thread.
UKPro Action Camera Cases
POV 20 – Top tray holds one camera. Bottom tray stashes extra accessories. Pressure-equalizing latches. Long-lasting silicone O-rings. Waterproof. Available in black.
7.9"L x 4.7"W x 4"H.
POV 20LT – Top tray holds one camera. Bottom tray stashes extra accessories. Rugged zippered closure with rubber zipper pulls.
7.7"L x 4.7"W x 4"H. Available in grey.
POV 30 – Top tray holds one camera. Bottom tray stashes extra accessories. Pressure-equalizing latches. Long-lasting silicone O-rings. Waterproof. Carabiner attachment strap. Available in black.
7.9"L x 4.7"W x 4"H.
POV 40 – Holds two cameras. Lid pocket stashes extra accessories. Pressure-equalizing latches. Long-lasting silicone O-rings. Waterproof. Neoprene hand strap.
12.2"L x 10.4"W x 3.3"H. (not shown)
GoPro® HERO5 Black Action-Camera The Frame
YOLOtek® PowerStick-53 Gen2 Action-Camera Boat Mount
GoPro® HERO5 Black Screen Protector
GoPro® Floaty For HERO4 Session
Welcome to this video tutorial Accessory Floaty GoPro HERO4 Session We check the box There is the floaty Naturally a safety screw a noose. And a clip for noose Assembly. It The go pro doesn't enter inside the floaty We must put. It inside the frame button opposite to the fixing side fix. It We can put GoPro+Frame inside the floaty. Now First insert the fixing hole Ok There is main button on the top There is the fixing hole in the bottom the secondary button on the side Well The go pro is fixed We insert the screw for greater safety. Now let's try it in water rinse the GoPro with unsalted water after Try. It the GoPro floats Remember to secure the GoPro with the noose You can film under water You can film in water level to Remember to secure the GoPro with the noose This video review is over Bye!.
UKPro Action Camera Poles
Sizes: 8", 22", 38", 54".
Color: Electric Blue.